Kia Optima: Removal

Kia Optima: Removal - Inhibitor Switch. Repair procedures - 35R Clutch Control Solenoid Valve(35R/C_VFS). Description and Operation - Automatic Transaxle System - Kia Optima TF 2011-2018 Service ManualKia Optima: Removal

1. Make sure vehicle does not roll before setting room side shift lever and T/M side manual control lever to "N" position.
2. Remove the battery and the battery tray. (Refer to "Charging system" in EE group.)
3. Remove the air cleaner assembly. (Refer to "Intake manifold" in EM group.)
4. Remove the shift cable mounting nut (B).
5. Disconnect the inhibitor switch connector (A).

6. Remove the manual control lever (B) and the washer after removing a nut (A).

When installing, affix the manual control lever and the inhibitor switch with Ø5mm (0.1969in.). Then tighten the inhibitor assembly mounting bolts.
7. Remove the inhibitor assembly (A) after removing the bolts (2ea).
Tightening torque:

9.8 11.8 N.m (1.0 1.2 kgf.m, 7.2 8.7 lb-ft)

When installing, tighten the inhibitor assembly mounting bolt lightly, so that necessary adjustments can be made. Tighten to specifications.

Related news

  • Steps for Determining Correct Load Limit
  • Toyota Sienna Service Manual: Windshield windowglass
  • Toyota Tacoma 2015-2018 Service Manual: Front Speed Sensor
  • Toyota RAV4 Service Manual: Oil filter
  • Toyota Sienna 2010-2018 Owners Manual: General maintenance

  • Kia Optima: Removal

    Kia Optima: Removal

    Kia Optima: Removal

    Kia Optima: Removal

    Kia Optima: Removal

    Kia Optima: Removal

    Kia Optima: Removal

    Kia Optima: Removal

    Kia Optima: Removal

    Kia Optima: Removal

    Kia Optima: Removal

    Kia Optima: Removal

    Kia Optima: Removal

    Kia Optima: Removal

    Kia Optima: Removal

    Kia Optima: Removal

    Kia Optima: Removal

    Kia Optima: Removal

    Kia Optima: Removal

    Kia Optima: Removal