Nissan Altima: Variable voltage control system
● Do not ground accessories directly to the battery terminal. Doing so will bypass the variable voltage control system and the vehicle battery may not charge completely.
● Use electrical accessories with the engine running to avoid discharging the vehicle battery.
Your vehicle is equipped with a variable voltage control system. This system measures the amount of electrical discharge from the battery and controls voltage generated by the generator. The current sensor A is located near the battery along the negative battery cable. If you add electrical accessories to your vehicle, be sure to ground them to a suitable body ground such as the frame or engine block area.
Jump startingIf jump starting is necessary, see “Jump starting” in the “In case of emergency” section of this manual. If the engine does not start by jump starting, the battery may have to be replaced. ...
Drive beltQR25DE engine 1. Power steering fluid pump pulley 2. Water pump pulley 3. Generator 4. Air conditioner 5. Crankshaft pulley 6. Drive belt Automatic tensioner WARNING Be sure the ignition swi ...
Before starting out on a trip
● Check that the vehicle and vehicle-tohitch mounting are in good condition. If any problems are apparent, do not tow the trailer. ● Check that the vehicle sits horizontally with the tr ...
A soft tap on the brake pedal, pushing the CANCEL button, or normal brake pressure while slowing the vehicle will deactivate Electronic Speed Control without erasing the set speed memory.