Nissan Sentra Service Manual: The steering switch (meter control switch) is inoperative
If any of the following malfunctions is found for the steering switch (meter control switch) operation.
- All switches are inoperative
- The specified switch cannot be operated
1.Check steering switch signal circuit
Check the steering switch signal circuit. Refer to MWI-55, "Diagnosis Procedure".
Is the inspection result normal? YES >> GO TO 2.
NO >> Repair harness or connector.
2.Check steering switch (meter control switch)
Check the steering switch. Refer to MWI-55, "Component Inspection".
Is the inspection result normal? YES >> Replace combination meter. Refer to MWI-77, "Removal and Installation".
NG >> Replace steering switch. Refer to MWI-79, "Removal and Installation".
Push-button ignition switch illumination circuit
Description Provides the power supply and the ground to control the push-button ignition switch illumination. Component function check 1.Check push-button ignition switch illumination operation Consult active test Turn the ignition switch ON. Select engine sw illumi of bcm (intelligen ...
Removal and installation
A/C SWITCH ASSEMBLY Removal and Installation REMOVAL Remove the CVT shift selector finisher (CVT: RE0F11A). Refer to TM-253, "Removal and Installation". Remove the MT shift selector finisher (6MT: RS6F94R).