Toyota Corolla Repair Manual: Removal and installation of engine intake parts
- If any metal tip is mixed in the inlet pass, this may give a bad effect to the engine and turbocharger.
- when removing and installing the inlet system parts, close the opening of the removed inlet system parts and the engine with a clean shop rag or gummed tape.
- when installing the inlet system parts, check that there is no mixing of a metal tip.
Handling of hose clampsBefore removing the hose, check the depth of the inserting portion and the clamp position in order to restore it surely. change a deformed or dented clamp for a new one. in ...
Installation with LATCH system
1 Widen the gap between the seat cushion and seatback slightly. ► Type A 2 Latch the hooks of the lower straps onto the LATCH anchors. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor. For owners in Canada: The symbol ...
1 Check fuse(ecu–ig) Remove the ecu–ig fuse from the instrument panel j/b. check the continuity of the ecu–ig fuse. Ok: continuity 2 Inspect terminal voltage(b) Remove the cruise control ecu assy with connector still connected. turn the ignition switch to on.