Toyota RAV4 Owners Manual: Using a bluetoothphone

Toyota RAV4 Owners Manual: Using a bluetoothphone

Toyota RAV4 Owners Manual: Using a bluetooth® phone

The hands-free system is a function that allows you to use your cellular phone without touching it.

This system supports bluetooth®. Bluetooth® is a wireless data system that allows the cellular phone to wirelessly connect to the hands-free system and make/receive calls.

Before making a phone call, check the connection status, battery charge, call area and signal strength.

If a bluetooth® device cannot be connected, check the connection status on the phone screen. If the device is not connected, either register or reconnect it.

Phone screen

To display the screen shown below, press the   switch on the steering
wheel or the v  button.

Several functions are available to operate on each screen that is displayed by selecting the 4 tabs.

  1. Device name
  2. Bluetooth® connection status

Toyota RAV4. Phone screen


Telephone switch

Microphone

The vehicle’s built in microphone is used when talking on the phone.

The person you are speaking to can be heard from the front speakers.

To use the hands-free system, you must register your bluetooth® phone in the system.

Toyota RAV4. Microphone


Status display

You can check indicators such as signal strength and battery charge on the phone screen.

  1. Connection status
  2. Signal strength
  3. Battery charge

Toyota RAV4. Status display


Toyota RAV4. Status display


Making a call
Once a bluetooth® phone is registered, you can make a call using the following procedure: Dialing Display the phone screen. Select the “dial pad” tab and enter a phone number. To delet ...
Other materials:

Door control transmitter module
Components Removal Remove transmitter housing cover Notice: Take extra care when handling these precision electronic components. Twist the screwdriver in the direction of the arrow mark in the illustration, and open the transmitter housing cover. Notice: Do not forcibly pry ...

Selecting shift ranges in the s position
To enter s mode, shift the shift lever to s. Shift ranges can be selected by operating the shift lever, allowing you to drive in the shift range of your choosing. The shift range can be selected by the shift lever. Upshifting Downshifting The selected shift range, from 1 to 6, will be di ...

Installation
Install water pump assembly Remove any old seal packing material from the contact surface. Apply a continuous line of seal packing as shown in the illustration. Seal packing: toyota genuine seal parking black, three bond 1207b or equivalent Standard seal diameter: 2.2 To 2.

Related news

  • Battery drainage prevention function
  • Toyota Sienna Service Manual: Short to GND in Front Pretensioner Squib LHCircuit
  • Toyota RAV4 Service Manual: Front wheel alignment
  • Mazda 3 Service Manual: Precaution
  • Illuminated entry

  • Toyota RAV4 Owners Manual: Using a bluetoothphone

    Toyota RAV4 Owners Manual: Using a bluetoothphone

    Toyota RAV4 Owners Manual: Using a bluetoothphone

    Toyota RAV4 Owners Manual: Using a bluetoothphone

    Toyota RAV4 Owners Manual: Using a bluetoothphone

    Toyota RAV4 Owners Manual: Using a bluetoothphone

    Toyota RAV4 Owners Manual: Using a bluetoothphone

    Toyota RAV4 Owners Manual: Using a bluetoothphone

    Toyota RAV4 Owners Manual: Using a bluetoothphone

    Toyota RAV4 Owners Manual: Using a bluetoothphone

    Toyota RAV4 Owners Manual: Using a bluetoothphone

    Toyota RAV4 Owners Manual: Using a bluetoothphone

    Toyota RAV4 Owners Manual: Using a bluetoothphone

    Toyota RAV4 Owners Manual: Using a bluetoothphone

    Toyota RAV4 Owners Manual: Using a bluetoothphone

    Toyota RAV4 Owners Manual: Using a bluetoothphone

    Toyota RAV4 Owners Manual: Using a bluetoothphone

    Toyota RAV4 Owners Manual: Using a bluetoothphone

    Toyota RAV4 Owners Manual: Using a bluetoothphone

    Toyota RAV4 Owners Manual: Using a bluetoothphone

    Toyota RAV4 Owners Manual: Using a bluetoothphone