Toyota RAV4 Service Manual: Test mode procedure

Toyota RAV4 Service Manual: Test mode procedure

  1. Test mode check

Hint:

  • When entering the test mode, the tire pressure warning ecu sets all the test dtcs first. After completing the test mode for each inspection item, the dtcs that are determined normal by the tire pressure warning ecu will be erased.

    The dtcs for other inspection items may not be erased when only a certain signal is inspected.

  • When the test mode returns back to the normal mode, all the test dtcs will be erased.
  1. Make sure that the ignition switch is off.
  2. Connect the intelligent tester (with can vim) to the dlc3.
  3. Turn the ignition switch on.

Toyota RAV4. Test mode check


Toyota RAV4. Test mode check


  1. Select test mode on the intelligent tester.

Toyota RAV4. Test mode check


  1. Confirm that the tire pressure warning light in the combination meter blinks at 0.125 Second intervals.
  1. Perform signal check

Hint:

  • When entering the signal check, the tire pressure warning ecu sets all the signal check dtcs first.

    After completing the signal check for each inspection item, the dtcs that are determined normal by the tire pressure warning ecu will be erased. The dtcs for other inspection items may not be erased when only a certain signal is inspected.

  • When the signal check returns back to normal mode, all the signal check dtcs will be erased.

Toyota RAV4. Perform signal check


  1. Make sure that the ignition switch is off.
  2. Connect the intelligent tester (with can vim ) to the dlc3.
  3. Turn the ignition switch on.
  4. Select signal check on the intelligent tester.
  5. Drive the vehicle at 12 mph (20 km/h) or more for 10 seconds or more
  6. Loosen the valve core and rapidly reduce the pressure (above 40 kpa / 30 seconds or more).

Toyota RAV4. Perform signal check


Hint:

The transmitter id can be transmitted by rapidly reducing the tire pressure.

  1. Result

Hint:

After the signal check is completed, check for a dtc and signal check dtc to confirm the system status.


  1. End of signal check

After completing test mode (signal check), turn the ignition switch off and disconnect the tester.

Dtc of signal check (test diagnosis) function: If a malfunction code is displayed during the test mode dtc check, check the circuit listed for that code. For details of each code, refer to the "see page" of the "dtc no." In the chart.

Toyota RAV4. Perform signal check


Registration
In case of tire pressure warning ecu replacement Read id stored in the old ecu using the intelligent tester. In case of tire pressure warning valve and transmitter and/or tire pre ...
Problem symptoms table
Hint: Use the table below to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order of probability in the "suspected area" column ...
Other materials:

Transmitter id
Description Hint: It is necessary to perform the procedure to identify the tire pressure monitor valve that is malfunctioning because it cannot be identified by the output dtc. Inspection procedure Notice: It is necessary to register an id code after replacing the tire pressure wa ...

Check mode procedure
Description Check mode has a higher sensitivity to malfunctions and can detect malfunctions that normal mode cannot detect. Check mode can also detect all the malfunctions that normal mode can detect.

Related news

  • Chevrolet Sonic Repair Manual: Range Selector Lever Cable Bracket Replacement
  • Mazda Mazda6: Break-In Period
  • Chevrolet Cruze Repair Manual: Body Rear End Panel Replacement (MAG-Welding)
  • Nissan Sentra Owners Manual: Slide front armrest (if so equipped)
  • Nissan Sentra Owners Manual: Difference between predicted and actual distances

  • Toyota RAV4 Service Manual: Test mode procedure

    Toyota RAV4 Service Manual: Test mode procedure

    Toyota RAV4 Service Manual: Test mode procedure

    Toyota RAV4 Service Manual: Test mode procedure

    Toyota RAV4 Service Manual: Test mode procedure

    Toyota RAV4 Service Manual: Test mode procedure

    Toyota RAV4 Service Manual: Test mode procedure

    Toyota RAV4 Service Manual: Test mode procedure

    Toyota RAV4 Service Manual: Test mode procedure

    Toyota RAV4 Service Manual: Test mode procedure

    Toyota RAV4 Service Manual: Test mode procedure

    Toyota RAV4 Service Manual: Test mode procedure

    Toyota RAV4 Service Manual: Test mode procedure

    Toyota RAV4 Service Manual: Test mode procedure

    Toyota RAV4 Service Manual: Test mode procedure

    Toyota RAV4 Service Manual: Test mode procedure

    Toyota RAV4 Service Manual: Test mode procedure

    Toyota RAV4 Service Manual: Test mode procedure

    Toyota RAV4 Service Manual: Test mode procedure

    Toyota RAV4 Service Manual: Test mode procedure

    Toyota RAV4 Service Manual: Test mode procedure

    Toyota RAV4 Service Manual: Test mode procedure

    Toyota RAV4 Service Manual: Test mode procedure

    Toyota RAV4 Service Manual: Test mode procedure

    Toyota RAV4 Service Manual: Test mode procedure

    Toyota RAV4 Service Manual: Test mode procedure

    Toyota RAV4 Service Manual: Test mode procedure

    Toyota RAV4 Service Manual: Test mode procedure

    Toyota RAV4 Service Manual: Test mode procedure