Toyota Sienna 2010-2018 Owners Manual: Mobile Assistant

Toyota Sienna 2010-2018 Owners Manual: Mobile Assistant

Toyota Sienna 2010-2018 Owners Manual: Mobile Assistant

The Mobile Assistant feature will activate Apple’s Siri® Eyes Free mode via the steering wheel switches. To operate the Mobile Assistant, a compatible cellular phone must be registered and connected to this system via Bluetooth®.

Toyota Sienna. Mobile Assistant


  1. Press and hold theuntil
    you hear the beeps

Toyota Sienna. Mobile Assistant


  1. The Mobile Assistant can be used only when the following screen is displayed.

    To cancel the Mobile Assistant, select “Cancel”, or press and hold theon the steering wheel.


    To restart the Mobile Assistant for additional commands, press the on the steering wheel.


  • Mobile Assistant can only be restarted after the system responds to a voice command.
  • After some phone and music commands, the Mobile Assistant feature will automatically end to complete the requested action.

Adjusting the Mobile Assistant volume

The volume of the Mobile Assistant can be adjusted using the “PWR/VOL” knob or steering wheel volume control switches. The Mobile Assistant and phone call volumes are synchronized.

Notes about Mobile Assistant

  • The available features and functions may vary based on the iOS version installed on the connected device.
  • Some Siri® features are limited in Eyes Free mode. If you attempt to use an unavailable function, Siri® will inform you that the function is not available.
  • If Siri® is not enabled on the cellular phone connected via Bluetooth®, an error message will be displayed on the screen.
  • While a phone call is active, the Mobile Assistant cannot be used.
  • If using the navigation feature of the cellular phone, ensure the active audio source is Bluetooth® audio or iPod in order to hear turn by turn direction prompts.
Command list
Some recognizable voice commands and their actions are shown below as examples. Basic Command Action “Help” Prompts voice guidance to offer examples of comman ...
Other materials:

Reassembly
1. INSTALL 2ND BRAKE PISTON O-RING (a) Coat 2 new O-rings with ATF, and install them in the 2nd brake piston. NOTICE: Make sure that the O-ring is not twisted or pinched. 2.

Related news

  • Hyundai Elantra: Outside light
  • Changing the batteries
  • Toyota Sienna Service Manual: Occupant Classification ECU Malfunction
  • Kia Soul: Curtain Airbag (CAB) Module. Installation
  • Nissan Maxima: Push-Button Ignition Switch

  • Toyota Sienna 2010-2018 Owners Manual: Mobile Assistant

    Toyota Sienna 2010-2018 Owners Manual: Mobile Assistant

    Toyota Sienna 2010-2018 Owners Manual: Mobile Assistant

    Toyota Sienna 2010-2018 Owners Manual: Mobile Assistant

    Toyota Sienna 2010-2018 Owners Manual: Mobile Assistant

    Toyota Sienna 2010-2018 Owners Manual: Mobile Assistant

    Toyota Sienna 2010-2018 Owners Manual: Mobile Assistant

    Toyota Sienna 2010-2018 Owners Manual: Mobile Assistant

    Toyota Sienna 2010-2018 Owners Manual: Mobile Assistant

    Toyota Sienna 2010-2018 Owners Manual: Mobile Assistant

    Toyota Sienna 2010-2018 Owners Manual: Mobile Assistant

    Toyota Sienna 2010-2018 Owners Manual: Mobile Assistant

    Toyota Sienna 2010-2018 Owners Manual: Mobile Assistant

    Toyota Sienna 2010-2018 Owners Manual: Mobile Assistant

    Toyota Sienna 2010-2018 Owners Manual: Mobile Assistant

    Toyota Sienna 2010-2018 Owners Manual: Mobile Assistant

    Toyota Sienna 2010-2018 Owners Manual: Mobile Assistant

    Toyota Sienna 2010-2018 Owners Manual: Mobile Assistant

    Toyota Sienna 2010-2018 Owners Manual: Mobile Assistant

    Toyota Sienna 2010-2018 Owners Manual: Mobile Assistant

    Toyota Sienna 2010-2018 Owners Manual: Mobile Assistant

    Toyota Sienna 2010-2018 Owners Manual: Mobile Assistant

    Toyota Sienna 2010-2018 Owners Manual: Mobile Assistant