Toyota Sienna Service Manual: Gyro Error
DTC 58-10 Gyro Error
DTC 80-10 Gyro Error
DTC Detection Condition
|58-10||Ground short, power supply short, or open circuit in the gyro signal||
|80-10||Ground short, power supply short, or open circuit in the gyro signal|
HINT: After the inspection is completed, clear the DTCs.
1 CHECK VEHICLE SENSOR (NAVIGATION CHECK MODE)
- Enter the "Navigation Check" mode (Vehicle Sensors).
- Check the gyro voltage.
Standard voltage: 0.1 to 4.5 V
2 CLEAR DTC
- Clear the DTCs
3 RECHECK DTC
- Recheck for DTCs and check if the same trouble occurs again.
HINT: If DTCs are detected frequently, replace the radio and navigation assembly.