Toyota Sienna Service Manual: Laser sensor
1. INSPECT FRONT SEAT INNER BELT ASSEMBLY RH Release the seat belt (Buckle switch is ON). Check the resistance between the terminals. Standard If the result is not as specified, replace the inner belt assembly. Inspect the buckle switch. Fasten ...
1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE HINT: See page EM-26 2. REMOVE OIL LEVEL GAUGE GUIDE SUBASSEMBLY (See page EM-39) 3. REMOVE NO. 1 OIL PIPE (See page EM-77) 4. REMOVE OIL PIPE (See page EM-77) 5. REMOVE CRANKSHAFT PULLEY (See page EM-79) 6. SEPARATE OIL COOLER PIPE (a) Remove th ...
1. REMOVE FRONT DISC BRAKE BUSH DUST BOOT (a) Using soft jaws on the vise, hold the front disc brake cylinder mounting LH in the vise through aluminum plates. (b) Using a screwdriver and hammer, remove the 2 front disc brake bush dust boots from the front disc brake cylinder mounting LH.