Toyota Tacoma 2015-2018 Service Manual: Short in Curtain Shield Squib RH Circuit (B1830/57-B1833/57)
REASSEMBLY CAUTION / NOTICE / HINT HINT: Use the same procedure for both the LH and RH sides. The procedure described below is for the LH side. PROCEDURE 1. INSTALL CLEARANCE LIGHT BULB (a) Install the clearance light bulb to the clearance light socket. (b) Turn t ...
INSPECTION PROCEDURE 1. INSPECT TIE ROD END SUB-ASSEMBLY (a) Flip the ball joint stud back and forth 5 times as shown in the illustration before installing the nut. (b) Using a torque wrench, turn the nut continuously at a rate of 2 to 4 seconds per turn and check the torque reading on the ...
PRECAUTION 1. PRECAUTION NOTICE: When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected (See page ).